[s-x86] Re: soundblaster dma

[Michael Riley <mikeri@xxxxxxxxxxxx>]

> Date: Sun, 06 Feb 2000 22:23:59 -0800
> From: "Jessie Cogar" <jcogar@xxxxxxxxxxxx>
> To: solarisonintel@xxxxxxxxxxx
> Subject: [s-x86] soundblaster dma
> 
> I have installed solaris 7 on a machine with a vibra 16
> soundcard. During boot i get the error,
> 
> WARNING: sbpro: 16-bit DMA channel is incorrect. Requested DMA channel
> 3; valid channels are 5,6,7
>  WARNING: sbpro: valid I/O base address not found in reg property
> 
> Is there a way to configure it to work, or is a person s.o.l.
> with a vibra16 and the supplied sbpro driver?
> 
> Thanks,
> Jessie Cogar

You can try and edit the sbpro.conf file and see if ti will work after you
add DMA 3 as a legitimate DMA channel.  Try copying one of the lines where
5, 6, or 7 are used and put in 3.  Even better would be if you could just 
change your settings to use one of those channels.

Mike


------------------------------------------------------------------------
Valentine's Day Shopping Made Simple.  Click Here!
http://click.egroups.com/1/1147/3/_/3702/_/949944729/

-- Easily schedule meetings and events using the group calendar!
-- http://www.egroups.com/cal?listname=solarisonintel&m=1